Crossville Laminam Blade

The Alpha® Crossville Laminam Blade is designed for high-speed cutting of Laminam and other Porcelain Thin Panels. Equipped with a smooth continuous diamond rim and bond hardness best suited for glass materials to provide cuts with minimal chipping. The Laminam Blade is an excellent choice for plunge cutting, trimming near the edges and for cutting an internal radius. Since the quality of the cut is high, providing straight and true cuts with minimal chipping even near the edges, the waste is kept to a minimum creating a cutting solution that is quite cost-effective. The Alpha® Crossville Laminam Blade is the ideal blade for the porcelain contractor looking for a high-speed, portable, long-lasting cutting solution.

Question : Can I dry cut Laminam by Crossville® with the Alpha®/Crossville® Laminam Diamond Blade with a low speed polisher?

Answer : No, you cannot use the Alpha®/Crossville® Laminam Diamond Blade dry on a low speed polisher. However, if you use the blade along with the water, you can use it.

Question : Can I dry cut other porcelain tile made by Crossville® Tile by using Alpha®/Crossville® Laminam Diamond Blade?

Answer : No, the Alpha®/Crossville® Laminam Diamond Blade is exclusively designed for the dry cut of Laminam so that Alpha® doesn’t recommend using it for any other application.

Question : Can I use Alpha®/Crossville® Laminam Diamond Blade to cut other materials?

Answer : Yes. Alpha® recommends the wet cutting method if you would like to cut other porcelain panels or glass tiles.

Question : Does Alpha® offer any other sizes of the Alpha®/Crossville® Laminam Diamond Blade?

Answer : No. We have only one size that is 4-3/8” with 7/8” arbor with a 20mm adapter so that you can fit on small angle grinders and stone cutters.

Question : Does Alpha® offer any other tools for Crossville® Laminam?

Answer : Yes. We recommend EZ Thin Tile Cutters, EZ Glass Running Plier, Spike Ruler, Diamond Hand Pads, Electroplated Drill Bits, Ecoguards and a HEPA Vacuum, just name a few.

Question : Shall we offer Alpha®/Crossville® Laminam Diamond Blade to other tile dealers who don’t carry Laminam?

Answer : If the dealer requests Alpha®/Crossville® Laminam Diamond Blade specifically, you may offer the product. However, if they carry other thin porcelain tile and panel, please recommend the Alpha® Katana blade instead.

Question : How can I make an electric box cut-out or an internal corner cut?

Answer : Please view the Technical Videos I mentioned above at the website of Crossville® Laminam. You need to make a drill hole at all corners by using an electroplated drill bit then connect holes by a straight cut.

Question : Can I dry cut a sink hole with the Alpha®/Crossville® Laminam Diamond Blade?

Answer : Yes. Since Crossville® Laminam is very thin, you can score the curved line to make a sinkhole cut-out.